Enylmorpholine Colloidal Gold Rapid Test Card Instruction Manual

Product number:
Y
B011C01K

summary

enylmorpholine
(Diethomorph) is a morpholine widespread fungicide, mainly used for the prevention and control of mold, Phytophthora, and fungus

Fish and animals are highly toxic.

Detection principle

This product applies the principle of competitive inhibition colloidal gold immunochromatography to detect vegetables and fruits
enylmorpholine
residue
After the sample solution is dropped into the sample hole of the test card, the
enylmorpholine
It binds to the gold-labeled antibody, thereby preventing the gold-labeled antibody from interacting with the cellulose membrane
enylmorpholine
The conjugate binds, by
The color depth of the C and T lines determines the test results.

Scope of application

This product is suitable for samples of fresh vegetables, fruits, etc
enylmorpholine
Qualitative detection of residues.

Note: The types of test samples refer to the national standard
GB2763-2021
。

detection limit

0.05 mg / kg (ppm)

Kit composition

Tools you need to bring with you

serial number

             
规格composition

10 times/box

20 times/box

serial number

tool name

(1)

Detection card
(Contains dropper, desiccant)

10 servings

20 servings

(1)

Balance (accuracy)
0.01g）

（
5）

forceps

(2)

enylmorpholine
diluent

1 bottle

2 bottles

(2)

scissors

（
6）

Vortex meter

(3)

1.5 mL centrifuge tube

10 sticks

20 sticks

(3)

15mL/50mL centrifuge tube

（
7）

timer

(4)

manual

1 serving

1 serving

(4)

Pipette (
0.2mL/1mL）

Precautions

（
1) Tools such as knives, scissors, and stickers used to treat samples before testing should be cleaned to avoid cross-contamination.

（
2) Sample requirements: Avoid spoiling and deteriorating samples; avoid large pieces of soil (which can be thrown off or wiped off with other clean items).

（
3) Before testing, it is recommended that the sample be fully stirred and mixed (if the sample is small, the representative part should be taken, and then the sample should be weighed), so that the test results can more accurately reflect the actual drug residue of the sample.

（
4) The test environment temperature should be controlled at 20 to 30 degrees Celsius. Excessive or low temperatures can affect the test results.

（
5) Please follow the detection steps for testing. Do not touch the color rendering area of the test strip during operation, and avoid direct sunlight and direct blowing of the electric fan.

（
6) The sample solution to be tested needs to be clarified, otherwise it will easily lead to abnormal phenomena such as insignificant color development, which will affect the judgment of the experimental results.

（
7) Products that have expired or the aluminum foil bag is damaged cannot be used. Please use the test card immediately after unpacking.

（
8) Please use the sample as soon as possible after processing. If it takes too long, you need to reprocess the sample for testing.

（
9) When a positive result appears, it is recommended to retest. The test results of this product are for reference only. If you need confirmation, please refer to the relevant national standards and methods.

（
10) When adding standard for verification, methanol is generally selected as the solvent for the standard solution, and the final sample is recommended to be 10-50 μL.

（
11) When directly testing the standard solvent, use the extract of the kit, and the amount of organic solvent added should be controlled within 1%. Tap water, distilled water, purified water, or deionized water cannot be used as a negative control.

safety instructions

（
1) The experiment needs to match the corresponding experimental equipment and wear the necessary experimental equipment (white clothes, gloves, masks, etc.).

（
2) The test kit should be properly stored in a place that is not easily accessible to children.

（
3) After the experiment, maintain the cleanliness of the laboratory and the flow of air in the experimental environment.

（
4) This product is a one-time product and should be properly disposed of after testing. The experimental waste should be collected separately. It is recommended to dispose of it as medical waste.

（
5) The reagents involved in this product are safe and reliable, and do not contain carcinogenic, highly toxic, flammable, explosive, or highly corrosive reagents, but they should not be eaten.

Storage conditions and valid period

（
1) original packaging: in 2-30 ℃ dark dry storage, do not freeze, valid period of 12 months.

（
2) After unpacking: Use the test card immediately after unpacking, do not freeze.