Enylmorpholine Colloidal Gold Rapid Test Card Instruction Manual

Enylmorpholine Colloidal Gold Quick Detection Card Instruction Manual

Product Number: YB011C01K

Overview

Enylmorpholine (Diethomorph) is a morpholine widespread fungicide, mainly used for the prevention and treatment of mold, Phytophthora, and fungal rot. It is highly toxic to organic

and fish in water.

Detection Principle

This product applies the principle of competitive inhibition colloidal gold immunochromatography to detect enylmorpholine residues in vegetables and fruits. After the sample solution is dropped into the sample hole of the test card, the enylmorpholine in the sample solution is combined with the gold standard antibody, thereby preventing the gold standard antibody from binding with the enylmorpholine conjugate on the cellulose film. The detection result is judged by the color depth of C and T lines.

Scope of application

This product is suitable for qualitative detection of enylmorpholine residues in fresh vegetables, fruits and other samples.

Note: The types of test samples refer to the national standard GB2763-2021.

detection limit

0 mg/kg (ppm)

Kit Composition

Tools to bring your own

Serial number

Specification
Composition

1 0 times/box

20 times/box

Serial number

Tool name

(1)

Test card (containing dropper, desiccant)

10 parts

20 parts

(1)

Balance (accuracy 0.01g)

(6)

Vortex meter

(2)

Diluent

1 Bottle

2 Bottle

(2)

Scissors

(7)

Timer 1172779

1

1

(5)

Pipette (0.2mL/1mL)

Precautions

(1) Tools such as knives, scissors, and stickers should be cleaned to avoid cross-contamination.

(2) Sample requirements: Avoid spoilage and deterioration of the sample; avoid large pieces of soil (can be thrown off or wiped with other clean items).

(3) Before testing, it is recommended that the sample be fully stirred and mixed (if the sample is small, the representative part should be taken and then weighed), so that the test results can more realistically reflect the actual drug residue of the sample.

(4) The test environment temperature should be controlled at 20~ 30 ° C. Too high or too low temperature will affect the test results.

(5) Please follow the test steps for testing. Do not touch the color-developing area of the test strip during operation to avoid direct sunlight and direct blowing of electric fans.

(6) The sample solution to be tested needs to be clarified, otherwise it will easily lead to abnormal phenomena such as insignificant color development, which will affect the determination of experimental results.

(7) Products that have expired or damaged aluminum foil bags cannot be used. Please use the test card immediately after unpacking.

(8) Please use the sample as soon as possible after processing. If the time is too long, you need to reprocess the sample for re-testing.

(9) When a positive result appears, it is recommended to retest. The test results of this product are for reference only. If you need to confirm, please refer to the relevant national standards and methods.

(10) When adding a standard for verification, the standard solvent generally chooses methanol, and the final sample is recommended to add 10-50 μL of scalar.

(11) When directly testing the standard solvent with the kit matching the extract, the amount of organic solvent added is controlled within 1%, tap water, distilled water, purified water or deionized water can not be used as a negative control.

safety instructions

(1) The experiment needs to match the corresponding experimental equipment and wear the necessary experimental equipment (white clothes, gloves, masks, etc.).

(2) The test kit needs to be properly stored Please, put it in a place that is not easy for children to come into contact with.

(3) After the experiment, keep the laboratory clean and the air flow of the experimental environment.

(4) This product is a one-time product. After the test is completed, it should be properly disposed of. The experimental waste is collected separately. It is recommended to dispose of it according to the medical waste.

(5) The reagents involved in this product are safe and reliable, and do not contain carcinogenic, highly toxic, flammable, explosive, and highly corrosive reagents, but should not be eaten.

storage conditions and valid period

(1) Original packaging: Store dry at 2-30 ° C in the dark, do not freeze, valid period 12 months.

(2) After unpacking: Use the test card immediately after unpacking, do not freeze.

Precautions