Instructions

1 Principles and Uses of the Rapid Detection Card for Methophosphorus Colloidal Gold

This product is made of the principle of competitive inhibition of colloidal gold immunochromatography for the detection of methophosphorus pesticide residues in vegetables and fruits. After the sample solution is dropped into the sample hole of the detection card, the methophosphorus in the sample solution is combined with the gold standard antibody, thereby preventing the gold standard antibody from binding to the methophosphorus conjugate on the cellulose film. The detection result is judged by the color depth of the C and T lines.

2 technical indicators, detection limit: 0.5 mg/kg (ppm)

3. You need to bring your own tools

electronic balance (0.1-100 grams), scissors, forceps, disposable cups, vortex mixers, pipettes (0.1-1 mL), timers.

4 sample pretreatment

Take an appropriate amount of sample, cut it to about 1 cm square, weigh 2 grams of shredded sample in a 20 mL graduated sample cup, add 3 mL diluent, fully oscillate for 2 minutes, let stand for 1 minute, as the liquid to be tested;

5 sample testing

(1) Tear off the aluminum foil packaging bag of the test card, take out the test card/gold standard microporous/dropper (a total of 3 kinds of consumables), and place it on a flat, clean countertop.

(2) with a pipette or aluminum foil bag matching dropper to absorb the liquid to be tested 120 µL (about 4 drops) in the gold standard micropores, blown with a dropper to completely dissolve the purplish-red material in the pores, let stand horizontally, and wait for the reaction for 2 minutes; all the liquid in the gold standard micropores is added dropwise to the sample well (S) of the detection card;

(3) start timing after adding the sample, and leave it at room temperature for 8-10 minutes to judge the result, and other time interpretation is invalid.

6 result judgment

Negative (-): T-line color development is deeper than C-line or there is no significant difference with C-line color development, indicating that there is no substance to be tested in the sample or its concentration is lower than the detection limit.

Positive (+): The color development of the T-line is significantly weaker than that of the C-line or the T-line does not develop color, indicating that the concentration of the substance to be tested in the sample is equal to or higher than the detection limit.

Invalid: No C-line appears, indicating that the operation process is incorrect or the test card has failed. In this case, the instructions should be read carefully again and re-tested with a new test card.

7 Precautions

(1) Products that have expired or the aluminum foil bag is damaged should not be used.

(2) The test card should be restored to room temperature and opened when taken out of the refrigerator. The opened test card should be used as soon as possible to avoid moisture.

(3) Do not touch the white film surface in the center of the test card.

(4) The liquid extraction dropper should not be mixed to avoid

(5) The liquid to be tested should be clear, free of cloudy particles, and free of bacterial contamination, otherwise it will easily lead to abnormal phenomena such as blockage and inconspicuous color development, which will affect the judgment of experimental results.

(6) Please store the reagent in a place that is not easy for children to contact, and do not eat the equipped reagent.

(7) If you need to directly test the standard product, please prepare it with the diluent provided in the kit.

8 Storage and shelf life

(1) Storage conditions: 4-30 ° C Store in the dark, do not freeze.

(2) Shelf life: 1 year, see the outer packaging for the production date.

9 kit composition

specification

composition

10 times/box

20 times/box

test card (containing gold standard micropores, dropper, desiccant)

10 parts

20 parts

phosphorus monophosphate dilution

1 bottle

2

20 mL graduated sample cup

1 pieces

2 pieces

1 mL straw

10 pieces

20 pieces

manual

1 parts

1 copies